Secure the First Tread

What happens in this clip

Once the first tread is accurately positioned, secure it in place. If the treads are self-adhesive, carefully peel off the backing and firmly press the tread onto the stair, ensuring good contact across its entire surface. If not self-adhesive, apply double-sided carpet tape to the back of the tread before pressing it down. Ensure the tread is smooth and free of wrinkles.

Goal: Firmly attach the first stair tread to the stair

What's used

Materials

• Double-sided Carpet Tape
• Staple gun and staples (for more permanent installation)
• Stair Tread (Self-adhesive)

About the full video

This project demonstrates the quick and easy installation of pre-made, self-adhesive stair treads to add style, safety, and comfort to wooden stairs. The process involves preparing the stairs, accurately positioning each tread, and securing them in place, transforming a bare staircase into a finished look.

Step 4 of 5: Install Edge Strips

Starting from one end of the stair tread, align the edge strip precisely with the edge. Press down firmly, working your way across the strip to ensure full contact with the adhesive. If using tape, peel off the backing as you go. Smooth out any bubbles or wrinkles. Ensure the strip is flush with the edges of the tread and does not overhang.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread (this video)

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion