Project Completion

What happens in this clip

Once all installation steps are complete, including securing risers, treads, and optional return trim, and after allowing the adhesive to fully dry (typically 24 to 48 hours), your beautiful new stairs are ready to use. Enjoy your newly updated staircase for years to come!

Goal: Complete the stair tread installation

About the full video

This project provides step-by-step instructions for properly installing performance accessory stair treads and risers. It covers preparation, precise measuring and cutting, adhesive application, securing with a finish nailer, caulking expansion gaps, and installing optional return trim for exposed stair sides. The guide emphasizes the importance of specific adhesive types and proper expansion gaps for a durable and aesthetically pleasing finish.

Step 5 of 5: Secure and Cure

After all edge strips have been applied, check that they are all securely in place. Avoid walking on the stairs or placing any heavy objects on them until the adhesive has fully cured. This curing time is critical for long-term adhesion and safety.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion (this video)