Simple Solutions: How To Prevent Slips And Falls On Outside Steps

Moments in this video

1. 0:13–0:20 Measure and Cut Strips From How to Add High-Contrast Edge Strips to Stairs for Low Vision, Step 2: Measure and Cut Strips

   To prepare the strip for application, unroll a section of the abrasive anti-slip strip and lay it out along the length of the stair tread. Align one end of the strip with the edge of the stair. Once the correct length is determined, use a pair of shears or heavy-duty scissors to cut the strip neatly to size. This custom cut ensures the strip covers the appropriate width of the tread without excess.

2. 0:20–0:45 Peel and Adhere Strip From How to Make Concrete Basement Stairs Non-Slip, Step 3: Install Anti-Slip Tread Strips

   The abrasive strip has a wax paper backing that protects the adhesive. Locate a corner of the strip and carefully peel off this wax paper backing to expose the strong adhesive layer. Once the adhesive is exposed, carefully turn the strip over. Position the strip on the stair tread, aiming to keep it approximately 1 inch away from the front edge (the nosing) of the step. This placement is crucial because it aligns the strip with where foot traffic is most common. Once positioned correctly, press down firmly along the entire length of the strip to ensure it adheres securely to the stair surface.

3. 0:20–0:45 Peel and Adhere Strip From How to Add High-Contrast Edge Strips to Stairs for Low Vision, Step 3: Apply Adhesive

   The abrasive strip has a wax paper backing that protects the adhesive. Locate a corner of the strip and carefully peel off this wax paper backing to expose the strong adhesive layer. Once the adhesive is exposed, carefully turn the strip over. Position the strip on the stair tread, aiming to keep it approximately 1 inch away from the front edge (the nosing) of the step. This placement is crucial because it aligns the strip with where foot traffic is most common. Once positioned correctly, press down firmly along the entire length of the strip to ensure it adheres securely to the stair surface.

4. 0:20–0:45 Peel and Adhere Strip From How to Add High-Contrast Edge Strips to Stairs for Low Vision, Step 4: Install Edge Strips

   The abrasive strip has a wax paper backing that protects the adhesive. Locate a corner of the strip and carefully peel off this wax paper backing to expose the strong adhesive layer. Once the adhesive is exposed, carefully turn the strip over. Position the strip on the stair tread, aiming to keep it approximately 1 inch away from the front edge (the nosing) of the step. This placement is crucial because it aligns the strip with where foot traffic is most common. Once positioned correctly, press down firmly along the entire length of the strip to ensure it adheres securely to the stair surface.

Guides that use this video

• How to Add High-Contrast Edge Strips to Stairs for Low Vision
• How to Make Concrete Basement Stairs Non-Slip