Measure and Cut Anti-Slip Strip

What happens in this clip

Unroll the anti-slip staircase guard strip and measure the length required for the edge of the first stair. Using scissors, carefully cut the strip to the determined length. Repeat this measurement and cutting process for all stairs that will receive a guard.

Goal: Obtain correctly sized anti-slip strips for each stair

What's used

Tools

• Measuring tape
• Yardstick
• Scissors
• Box cutter

Materials

• Anti-slip staircase guard strip
• Stair tread covers

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 2 of 5: Measure and Cut Strips

For each stair tread, measure the width from edge to edge. Use a tape measure for accuracy. Transfer these measurements to your chosen edge strip material. Using a utility knife and a straight edge, carefully cut the strips to the exact length required for each tread. Ensure cuts are straight and clean.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip (this video)
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion