Apply Anti-Slip Strip

What happens in this clip

Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.

Goal: Secure the anti-slip strip firmly to the stair edge

What's used

Tools

• Hands
• Squeegee

Materials

• Anti-slip staircase guard strip

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 3 of 5: Apply Adhesive

Depending on the type of edge strip material and the manufacturer's recommendation, apply a suitable adhesive. This could be a strong, double-sided tape specifically designed for flooring or stair treads, or a construction adhesive. If using tape, carefully peel off the backing and apply it evenly to the back of the strip. If using liquid adhesive, apply a thin, consistent bead along the edge of the tread where the strip will be placed.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip (this video)
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion