Trim Excess Netting

What happens in this clip

Once the netting is secured by the cover strips, carefully trim any excess netting that extends beyond the outer edge of the cover strips. Use scissors to achieve a clean and flush finish. This ensures a neat appearance and prevents any loose edges that could snag or fray.

Goal: Achieve a clean and professional finish for the screen.

What's used

Tools

• Scissors

About the full video

This DIY project provides step-by-step instructions on how to install a magnetic window screen to effectively keep insects out while allowing easy opening and closing of the window. The installation process involves preparing the window frame with adhesive magnetic strips, layering the mesh netting, securing it with a second set of magnetic strips and plastic covers, attaching corner pieces, and adding a convenient pull tab for effortless operation.

Step 5 of 6: Trim Excess Netting and Secure Loose Ends

Once the netting is fully attached, carefully trim away any significant excess netting material. Inspect all fastening points (ties or clips) to ensure they are tight and that there are no sharp edges or loose ends that could pose a hazard. Tuck away any loose ends of the netting or ties.

Open this step in the guide

Every video in How to Install Banister Safety Netting to Childproof Stair Railings

1. Step 1: Measure Stair Railing Length

   • 0:25–0:43 Measure Total Railing Length
   • 0:37–1:14 Plan and Measure Stair Railing Components
   • 0:07–0:51 Measure Staircase Length and Angle

2. Step 2: Cut Netting to Size

   • 2:25–2:36 Prepare Netting
   • 0:15–0:29 Secure Net to Balcony Railing

3. Step 3: Attach Netting to Top Railing

   • 1:49–2:42 Attach the Safety Netting
   • 2:05–2:20 Attach Netting with Plastic Ties
   • 0:13–0:15 Position the Safety Net

4. Step 4: Attach Netting to Bottom Railing and Balusters

   • 0:15–0:29 Secure Net to Balcony Railing
   • 0:13–0:15 Position the Safety Net
   • 1:49–2:42 Attach the Safety Netting

5. Step 5: Trim Excess Netting and Secure Loose Ends

   • 3:15–3:34 Trim Excess Netting (this video)
   • 3:46–5:37 Secure Netting to All T-posts
   • 5:02–5:36 Final Trimming and Access

6. Step 6: Perform a Final Safety Check

   • 0:29–0:34 Final Inspection and Adjustment
   • 0:15–0:29 Secure Net to Balcony Railing
   • 2:42–3:23 Final Inspection and Cleanup