Measure Total Railing Length

What happens in this clip

Using a tape measure, determine the total length of the area where the railing spindles will be installed. For example, the presenter measures 110 and 3/4 inches. Convert any fractional measurements into decimals for easier calculations (e.g., 110 3/4 inches becomes 110.75 inches).

Goal: Obtain the total linear measurement for spindle installation

What's used

Tools

• Tape Measure Stanley

About the full video

This project provides a comprehensive guide on how to mathematically calculate and physically implement perfectly even spacing for railing spindles, ensuring compliance with safety codes and achieving a visually appealing result. It covers measuring, calculating exact spacing, converting decimals to usable fractions, creating a custom spacer, and securing the spindles and rails.

Step 1 of 6: Measure Stair Railing Length

Begin by measuring the horizontal length of each section of the stair railing that requires netting. For angled sections, measure along the slope of the railing. Record these measurements accurately to ensure you purchase sufficient netting and fastening materials.

Open this step in the guide

Every video in How to Install Banister Safety Netting to Childproof Stair Railings

1. Step 1: Measure Stair Railing Length

   • 0:25–0:43 Measure Total Railing Length (this video)
   • 0:37–1:14 Plan and Measure Stair Railing Components
   • 0:07–0:51 Measure Staircase Length and Angle

2. Step 2: Cut Netting to Size

   • 2:25–2:36 Prepare Netting
   • 0:15–0:29 Secure Net to Balcony Railing

3. Step 3: Attach Netting to Top Railing

   • 1:49–2:42 Attach the Safety Netting
   • 2:05–2:20 Attach Netting with Plastic Ties
   • 0:13–0:15 Position the Safety Net

4. Step 4: Attach Netting to Bottom Railing and Balusters

   • 0:15–0:29 Secure Net to Balcony Railing
   • 0:13–0:15 Position the Safety Net
   • 1:49–2:42 Attach the Safety Netting

5. Step 5: Trim Excess Netting and Secure Loose Ends

   • 3:15–3:34 Trim Excess Netting
   • 3:46–5:37 Secure Netting to All T-posts
   • 5:02–5:36 Final Trimming and Access

6. Step 6: Perform a Final Safety Check

   • 0:29–0:34 Final Inspection and Adjustment
   • 0:15–0:29 Secure Net to Balcony Railing
   • 2:42–3:23 Final Inspection and Cleanup