Final Inspection and Adjustment

What happens in this clip

Once the entire safety net is secured, perform a thorough final inspection. Walk along the entire length of the balcony, checking for any loose spots, gaps between the net and the railing, or areas where the net might be sagging. Gently tug on the net at various points to ensure it's firmly attached and can withstand light pressure. If any weak points are found, add more zip ties or tighten existing ones. Ensure all trimmed zip tie tails are smooth and don't pose a scratching hazard. The goal is a uniformly secure and safe barrier.

Goal: Ensure the safety net is securely installed without gaps or loose areas

What's used

Tools

• Scissors
• Wire Cutters
• Zip Ties

About the full video

This project details the installation of a safety net on a balcony railing to prevent accidental falls of people, pets, or objects. The process involves measuring the area, positioning a fine-mesh net, and securely fastening it to the balcony's railing structure using durable zip ties, followed by a final inspection to ensure a safe and stable installation.

Step 6 of 6: Perform a Final Safety Check

Walk along the entire length of the installed netting. Push and pull on it to test its stability and ensure it is securely fastened at all points. Check for any sagging areas, loose ties, or potential gaps where a child could fit through. Ensure the netting does not obstruct safe passage on the stairs.

Open this step in the guide

Every video in How to Install Banister Safety Netting to Childproof Stair Railings

1. Step 1: Measure Stair Railing Length

   • 0:25–0:43 Measure Total Railing Length
   • 0:37–1:14 Plan and Measure Stair Railing Components
   • 0:07–0:51 Measure Staircase Length and Angle

2. Step 2: Cut Netting to Size

   • 2:25–2:36 Prepare Netting
   • 0:15–0:29 Secure Net to Balcony Railing

3. Step 3: Attach Netting to Top Railing

   • 1:49–2:42 Attach the Safety Netting
   • 2:05–2:20 Attach Netting with Plastic Ties
   • 0:13–0:15 Position the Safety Net

4. Step 4: Attach Netting to Bottom Railing and Balusters

   • 0:15–0:29 Secure Net to Balcony Railing
   • 0:13–0:15 Position the Safety Net
   • 1:49–2:42 Attach the Safety Netting

5. Step 5: Trim Excess Netting and Secure Loose Ends

   • 3:15–3:34 Trim Excess Netting
   • 3:46–5:37 Secure Netting to All T-posts
   • 5:02–5:36 Final Trimming and Access

6. Step 6: Perform a Final Safety Check

   • 0:29–0:34 Final Inspection and Adjustment (this video)
   • 0:15–0:29 Secure Net to Balcony Railing
   • 2:42–3:23 Final Inspection and Cleanup