Secure Netting to All T-posts

What happens in this clip

Once the netting is initially attached to the first T-post, pull the netting tight and use additional zip ties to secure it to the top of each subsequent T-post. After the top of the netting is secured, add two or three more zip ties lower down on each T-post to ensure the netting is firmly attached and doesn't sag excessively. Trim any excess length from the zip ties for a clean finish. Roll up any excess netting at the bottom to keep it off the ground, preventing it from freezing to the ice or accumulating snow and becoming damaged.

What's used

Tools

• Heavy-Duty Black Zip Ties
• Ladder
• Multi-Sport Netting
• Scissors

About the full video

This project provides a detailed guide on how to install durable and effective safety netting around an outdoor hockey rink. It covers the process of placing and pounding in T-posts, attaching multi-sport netting with zip ties, adding pipe insulators for a professional look, and securing additional netting for protective backstops. The guide also includes tips for placement and storage, ensuring a reliable and reusable setup for your game.

Step 5 of 6: Trim Excess Netting and Secure Loose Ends

Once the netting is fully attached, carefully trim away any significant excess netting material. Inspect all fastening points (ties or clips) to ensure they are tight and that there are no sharp edges or loose ends that could pose a hazard. Tuck away any loose ends of the netting or ties.

Open this step in the guide

Every video in How to Install Banister Safety Netting to Childproof Stair Railings

1. Step 1: Measure Stair Railing Length

   • 0:25–0:43 Measure Total Railing Length
   • 0:37–1:14 Plan and Measure Stair Railing Components
   • 0:07–0:51 Measure Staircase Length and Angle

2. Step 2: Cut Netting to Size

   • 2:25–2:36 Prepare Netting
   • 0:15–0:29 Secure Net to Balcony Railing

3. Step 3: Attach Netting to Top Railing

   • 1:49–2:42 Attach the Safety Netting
   • 2:05–2:20 Attach Netting with Plastic Ties
   • 0:13–0:15 Position the Safety Net

4. Step 4: Attach Netting to Bottom Railing and Balusters

   • 0:15–0:29 Secure Net to Balcony Railing
   • 0:13–0:15 Position the Safety Net
   • 1:49–2:42 Attach the Safety Netting

5. Step 5: Trim Excess Netting and Secure Loose Ends

   • 3:15–3:34 Trim Excess Netting
   • 3:46–5:37 Secure Netting to All T-posts (this video)
   • 5:02–5:36 Final Trimming and Access

6. Step 6: Perform a Final Safety Check

   • 0:29–0:34 Final Inspection and Adjustment
   • 0:15–0:29 Secure Net to Balcony Railing
   • 2:42–3:23 Final Inspection and Cleanup