Final Trimming and Access

What happens in this clip

Once the netting is fully installed and secured, trim any excess netting using shears or heavy-duty scissors. After trimming, inspect all attachments (anchors, ferrules, hog rings) for strength and ensure there are no gaps that birds could exploit. For areas where access may be needed for maintenance of lighting, plumbing, safety equipment, or other items behind the net, you can install a zipper. To do this, keeping the zipper closed, hog ring the cloth edges of the zipper directly to the netting. Once both sides of the zipper are hog-ringed, open the zipper and cut the strands of net in between the zipper teeth. This creates a functional, resealable opening in the net. For large netting jobs, support cables may be required to help strengthen the overall net structure. Consult with experts for advice on support cables for complex or extensive installations.

Goal: Trim excess netting, install access points, and ensure the netting is secure

What's used

Tools

• Hog Ring Tool Bird-B-Gone Inc.
• Pneumatic hog ring gun
• Hog Rings
• Shears
• Utility knife
• Support Cables (for large jobs)
• Zipper (optional)

About the full video

This project provides a comprehensive guide on how to install a Bird Net 2000 system to deter birds from specific areas. It covers the installation of various anchor types suitable for different surfaces, the proper technique for running and tensioning the perimeter straining wire, and the secure attachment of the bird netting using hog rings. The guide also includes steps for preparing the netting, creating access points with zippers, and performing final inspections to ensure a robust and effective bird exclusion system.

Step 5 of 6: Trim Excess Netting and Secure Loose Ends

Once the netting is fully attached, carefully trim away any significant excess netting material. Inspect all fastening points (ties or clips) to ensure they are tight and that there are no sharp edges or loose ends that could pose a hazard. Tuck away any loose ends of the netting or ties.

Open this step in the guide

Every video in How to Install Banister Safety Netting to Childproof Stair Railings

1. Step 1: Measure Stair Railing Length

   • 0:25–0:43 Measure Total Railing Length
   • 0:37–1:14 Plan and Measure Stair Railing Components
   • 0:07–0:51 Measure Staircase Length and Angle

2. Step 2: Cut Netting to Size

   • 2:25–2:36 Prepare Netting
   • 0:15–0:29 Secure Net to Balcony Railing

3. Step 3: Attach Netting to Top Railing

   • 1:49–2:42 Attach the Safety Netting
   • 2:05–2:20 Attach Netting with Plastic Ties
   • 0:13–0:15 Position the Safety Net

4. Step 4: Attach Netting to Bottom Railing and Balusters

   • 0:15–0:29 Secure Net to Balcony Railing
   • 0:13–0:15 Position the Safety Net
   • 1:49–2:42 Attach the Safety Netting

5. Step 5: Trim Excess Netting and Secure Loose Ends

   • 3:15–3:34 Trim Excess Netting
   • 3:46–5:37 Secure Netting to All T-posts
   • 5:02–5:36 Final Trimming and Access (this video)

6. Step 6: Perform a Final Safety Check

   • 0:29–0:34 Final Inspection and Adjustment
   • 0:15–0:29 Secure Net to Balcony Railing
   • 2:42–3:23 Final Inspection and Cleanup