Spray Clear Anti-Slip Coating

What happens in this clip

As another solution, or in addition to abrasive strips, apply an anti-slip or slip-resistant coating to your steps. The video highlights a clear, spray-on coating that is applied directly to the step treads after they have been thoroughly cleaned and dried. This type of coating creates a transparent, textured surface that significantly increases friction without altering the appearance of the wood. Spray the coating evenly across the treads, following the manufacturer's instructions for application distance and drying time.

Goal: Create a transparent, slip-resistant surface

What's used

Materials

• Anti-Slip/Slip-Resistant Coating Rust-Oleum Epoxy Shield Anti-Slip (partially visible)
• Non-slip additive for sealers
• slip-resistant surface on step treads.

About the full video

This project outlines several methods to enhance the safety of outdoor wooden steps, decks, or walkways by making them less slippery. It covers cleaning the wood, applying peel-and-stick abrasive strips, and using a clear, spray-on anti-slip coating to prevent slips and falls.

Step 2 of 4: Sand the Stair Treads (Optional)

If you are using a liquid or spray-on anti-slip coating, a light sanding can improve adhesion. Use a fine-grit sandpaper (180-220 grit) and gently scuff the surface of each tread. The goal is not to remove the finish, but to create a slightly rougher texture. After sanding, vacuum thoroughly again to remove all sanding dust.

Open this step in the guide

Every video in How to Stop Slipping on Hardwood Stairs in Socks

1. Step 1: Clean the Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:18–0:31 Clean the Stairs

2. Step 2: Sand the Stair Treads (Optional)

   • 0:46–0:59 Spray Clear Anti-Slip Coating (this video)

3. Step 3: Apply Anti-Slip Treatment

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 1:07–1:32 Initial Tread Application

4. Step 4: Allow Treatment to Cure

   • 0:24–0:30 Allow for Curing
   • 1:07–1:26 Allow Curing & Access Product Information
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure