Allow for Curing

What happens in this clip

Once the PVA mixture has been applied to all necessary areas, it is crucial to allow it to cure completely. The video recommends a curing time of 24 hours. During this period, avoid stepping on the stairs to allow the adhesive to fully set and create a strong, lasting bond, which will prevent future squeaks.

Goal: Ensure the adhesive fully sets and bonds the stair components

About the full video

This project details a simple and effective method to eliminate squeaky stairs by applying a diluted PVA glue mixture into the gaps and joints of the stair treads and risers. The adhesive penetrates the wood, creating a stronger bond and preventing the movement that causes squeaks.

Step 4 of 4: Allow Treatment to Cure

Once the anti-slip treatment has been applied, it needs time to cure and achieve its full strength and non-slip properties. This curing time can vary significantly depending on the product used, ranging from a few hours to several days. Avoid walking on the stairs, especially in socks, during this critical period to ensure the treatment adheres properly and develops its intended durability.

Open this step in the guide

Every video in How to Stop Slipping on Hardwood Stairs in Socks

1. Step 1: Clean the Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:18–0:31 Clean the Stairs

2. Step 2: Sand the Stair Treads (Optional)

   • 0:46–0:59 Spray Clear Anti-Slip Coating

3. Step 3: Apply Anti-Slip Treatment

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 1:07–1:32 Initial Tread Application

4. Step 4: Allow Treatment to Cure

   • 0:24–0:30 Allow for Curing (this video)
   • 1:07–1:26 Allow Curing & Access Product Information
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure