Clean the Stairs

What happens in this clip

Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.

Goal: Ensure stairs are clean and free of dirt, debris, stains, and marks.

What's used

Tools

• Damp rag
• Sponge
• Dust pan and brush
• Broom

About the full video

This video provides step-by-step instructions on how to easily install anti-slip stair treads on hardwood stairs, covering essential preparation, precise measurement for alignment, and proper application techniques to ensure a secure and bubble-free finish.

Step 1 of 4: Clean the Stair Treads

Before applying any anti-slip treatment, it is crucial to ensure the stair treads are impeccably clean. Use a vacuum cleaner with a brush attachment to remove loose dust and debris from corners and edges. Follow up with a hardwood floor cleaner and a damp (not wet) mop or microfiber cloth to wipe down each tread. Allow the stairs to dry completely before proceeding to the next step.

Open this step in the guide

Every video in How to Stop Slipping on Hardwood Stairs in Socks

1. Step 1: Clean the Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:18–0:31 Clean the Stairs (this video)

2. Step 2: Sand the Stair Treads (Optional)

   • 0:46–0:59 Spray Clear Anti-Slip Coating

3. Step 3: Apply Anti-Slip Treatment

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 1:07–1:32 Initial Tread Application

4. Step 4: Allow Treatment to Cure

   • 0:24–0:30 Allow for Curing
   • 1:07–1:26 Allow Curing & Access Product Information
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure