Clean the Stairs

What happens in this clip

Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.

Goal: Prepare the stair surface for tread installation.

What's used

Tools

• Vacuum Cleaner
• Broom and dustpan

About the full video

This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.

Step 1 of 4: Clean the Stair Treads

Before applying any anti-slip treatment, it is crucial to ensure the stair treads are impeccably clean. Use a vacuum cleaner with a brush attachment to remove loose dust and debris from corners and edges. Follow up with a hardwood floor cleaner and a damp (not wet) mop or microfiber cloth to wipe down each tread. Allow the stairs to dry completely before proceeding to the next step.

Open this step in the guide

Every video in How to Stop Slipping on Hardwood Stairs in Socks

1. Step 1: Clean the Stair Treads

   • 0:34–0:40 Clean the Stairs (this video)
   • 0:04–0:07 Clean the Staircase
   • 0:18–0:31 Clean the Stairs

2. Step 2: Sand the Stair Treads (Optional)

   • 0:46–0:59 Spray Clear Anti-Slip Coating

3. Step 3: Apply Anti-Slip Treatment

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 1:07–1:32 Initial Tread Application

4. Step 4: Allow Treatment to Cure

   • 0:24–0:30 Allow for Curing
   • 1:07–1:26 Allow Curing & Access Product Information
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure