Mount the Handrail to Brackets

What happens in this clip

Align the prepared handrail with the installed end brackets. Mount the handrail to these end brackets first, ensuring a snug and secure fit. Use a drill to drive screws through the brackets and into the handrail, making sure they are firmly attached. Once the ends are secured, proceed to install any additional center brackets along the length of the handrail, aligning them with studs and then attaching the handrail to these central brackets as well. This provides continuous support and stability for the entire handrail.

Goal: Attach the handrail to all installed wall brackets

What's used

Tools

• Drill FUEL
• Screwdriver (for lighter work)
• Handrail (with returns)
• Screws

About the full video

This DIY project provides step-by-step instructions for installing a wall-mounted handrail along a staircase. The process covers determining the correct height based on building codes, preparing the handrail by cutting and adding returns, securely installing mounting brackets into wall studs, and finally attaching the handrail to the brackets.

Step 6 of 7: Attach Handrail to Brackets

Carefully position the handrail onto the installed brackets. Ensure it sits flush and stable. If your brackets and handrail have pre-drilled holes for attachment, align them. Secure the handrail to each bracket using the designated screws or appropriate fasteners. Tighten them firmly but avoid overtightening.

Open this step in the guide

Other videos for this step

• Attach Handrail to Brackets
• Mount Handrail to Brackets