Drill Pilot Holes

What happens in this clip

Using a drill (specifically shown as a DeWalt brand cordless drill) equipped with a 3/16 inch drill bit, carefully drill pilot holes at each of the marked locations for the shelf brackets. Pilot holes prevent the wood studs from splitting and make it easier to drive in the screws, ensuring a cleaner installation.

Goal: Create guide holes for mounting screws

What's used

Tools

• 3/16 inch Drill Bit
• Drill DeWalt
• Impact driver
• Safety Glasses

About the full video

This project provides a step-by-step guide on how to install wall shelves, focusing on accurately locating wall studs, measuring and marking the desired mounting height, positioning and leveling the brackets, drilling pilot holes, securely fastening the brackets, and finally positioning and attaching the shelf units with shelf locks for a stable installation.

Step 4 of 7: Drill Pilot Holes

Select a drill bit slightly smaller than the diameter of your mounting screws. Drill pilot holes directly into the center of the marked studs at each bracket location. This makes driving the screws easier and reduces the risk of splitting the wood stud.

Open this step in the guide

Other videos for this step

• Pre-Drill Pilot Holes
• Drill Pilot Holes into Studs