Install Brackets and Mount Handrail

What happens in this clip

Once your bracket locations are marked, pre-drill pilot holes into the wall studs and then securely fasten the handrail brackets using appropriate screws. Start with the top and bottom brackets, ensuring they are level and aligned with your marked line. Then, attach the handrail to these two end brackets. After the ends are secure and the handrail is correctly positioned, install any intermediate (middle) brackets, ensuring they are evenly spaced and also securely fastened to wall studs for maximum support and stability.

Goal: Secure the handrail to the wall using the installed brackets.

What's used

Tools

• Drill/Driver
• Handrail
• Metal pipe
• Handrail brackets
• Pilot drill bit
• Screws

About the full video

This DIY project provides step-by-step instructions for installing a simple handrail on a stairway. It covers determining the correct height, securely mounting brackets into wall studs, cutting and assembling handrail end returns, and finally attaching and checking the stability of the handrail.

Step 5 of 7: Attach Handrail Brackets

Align each handrail bracket over its corresponding pilot hole. Insert the appropriate mounting screws through the bracket holes and into the pilot holes. Tighten the screws firmly using a drill or screwdriver until the brackets are snug against the wall and do not move. Ensure they are securely anchored into the studs.

Open this step in the guide

Other videos for this step

• Install Handrail Brackets (Wood Studs)
• Install Handrail Brackets