Install Trims
From How to Install Recessed Step Lights in a Stairwell Wall · Step 7 of 7 · Video by Today's Homeowner with Danny Lipford

Showing 2:19–2:48 of the source video. Watch the full video with every moment.
What happens in this clip
Once the recessed light housing is securely in place and wired, the next step is to install the decorative trim. The video showcases two common types of standard trims: black baffle and white baffle trims, which are also available in finishes like chrome and silver. These trims are designed to clip directly inside the recessed housing, providing a finished look and directing the light downwards. Simply align the trim with the housing and push it into place until it clicks or securely fits.
Goal: Attach the decorative trim to the recessed light housing
What's used
Tools
- Recessed Light Trim (Baffle Type)
- Open trim
- Gimbal trim
About the full video
This project provides a detailed guide on how to install recessed lighting in various scenarios, including new construction, existing rooms with attic access, and existing rooms without attic access using remodel cans. It covers the different components of recessed lighting, various trim options for different lighting effects (general, accent, task, wall wash, eyeball, pinhole), and offers advice on planning the layout and number of lights needed for a room.
Step 7 of 7: Finishing Touches
If your recessed lights come with separate trim pieces or covers, install them now according to the manufacturer's instructions. These typically snap or twist into place. Remove any debris, dust, or drywall scraps from the work area and ensure the stairwell is clean and safe.
Every video in How to Install Recessed Step Lights in a Stairwell Wall
Step 1: Plan Light Layout
- 0:34–0:49 Mark Light Placement
- 5:10–6:00 Integrate Stair Niche Lights
- 0:00–0:27 Planning and Safety
Step 2: Cut Fixture Openings
- 0:04–0:10 Mark and Cut Drywall Hole
- 0:00–0:01 Trace Cutout with Template
- 0:17–0:22 Cut the Ceiling Hole
Step 3: Run Electrical Wire
- 0:59–1:18 Run Electrical Wires
- 4:35–5:25 Run New Electrical Wires
- 1:57–2:46 Run Electrical Wires to Light Fixtures
Step 4: Connect Fixtures to Power
- 2:01–3:49 Connect Electrical Wires
- 0:41–0:51 Connect Electrical Wires
- 0:00–0:02 Connect Electrical Wires to Fixture
Step 5: Install Light Fixtures
- 4:51–5:50 Mount the Fixture in the Ceiling
- 0:18–0:22 Install Recessed Light
- 0:11–0:18 Connect and Install Recessed Light Fixture
Step 6: Restore Power and Test
- 0:00–0:30 Test and Finalize Installation
- 1:36–1:44 Restore Power and Test Functionality
- 0:24–0:26 Test New Lighting System
Step 7: Finishing Touches
- 0:16–0:33 Install Decorative Trim
- 2:19–2:48 Install Trims (this video)
- 2:19–2:28 Final Installation and Snap into Place
How to Install Recessed Step Lights in a Stairwell Wall
This project outlines the steps for installing recessed lighting fixtures into the walls alongside a stairwell. This involves planning the layout, cutting openings, running electrical wire, connecting the fixtures to a power source, and finishing the installation.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

