Connect and Install Recessed Light Fixture

What happens in this clip

Once the hole is cut, reach into the opening and pull out the electrical wiring that will power the recessed light. Many modern recessed lights are 'plug-and-play', meaning they have a simple connector that attaches directly to the building's electrical wiring. Connect the light fixture to the pulled-out electrical cord. Then, carefully slide the entire recessed light fixture, including its trim, up into the hole until it sits flush with the ceiling. The light typically has spring clips or tabs that secure it firmly in place within the drywall.

Goal: Securely connect the electrical wiring and install the recessed light into the ceiling hole.

What's used

Tools

• Electrical Wire
• Recessed Light Fixture HALO

About the full video

This project details the process of installing a recessed light, specifically focusing on how to center it in a shower area and use specialized tools like an adjustable hole saw with a dust collector for a clean and precise installation. The light used is a plug-and-play type, simplifying the electrical connection.

Step 5 of 7: Install Light Fixtures

Carefully push the wired recessed light fixture into the opening created in the drywall. Most fixtures have spring clips or mounting tabs that will engage with the back of the drywall to hold the fixture in place. Ensure the fixture is seated flush against the wall surface and is stable.

Open this step in the guide

Every video in How to Install Recessed Step Lights in a Stairwell Wall

1. Step 1: Plan Light Layout

   • 0:34–0:49 Mark Light Placement
   • 5:10–6:00 Integrate Stair Niche Lights
   • 0:00–0:27 Planning and Safety

2. Step 2: Cut Fixture Openings

   • 0:04–0:10 Mark and Cut Drywall Hole
   • 0:00–0:01 Trace Cutout with Template
   • 0:17–0:22 Cut the Ceiling Hole

3. Step 3: Run Electrical Wire

   • 0:59–1:18 Run Electrical Wires
   • 4:35–5:25 Run New Electrical Wires
   • 1:57–2:46 Run Electrical Wires to Light Fixtures

4. Step 4: Connect Fixtures to Power

   • 2:01–3:49 Connect Electrical Wires
   • 0:41–0:51 Connect Electrical Wires
   • 0:00–0:02 Connect Electrical Wires to Fixture

5. Step 5: Install Light Fixtures

   • 4:51–5:50 Mount the Fixture in the Ceiling
   • 0:18–0:22 Install Recessed Light
   • 0:11–0:18 Connect and Install Recessed Light Fixture (this video)

6. Step 6: Restore Power and Test

   • 0:00–0:30 Test and Finalize Installation
   • 1:36–1:44 Restore Power and Test Functionality
   • 0:24–0:26 Test New Lighting System

7. Step 7: Finishing Touches

   • 0:16–0:33 Install Decorative Trim
   • 2:19–2:48 Install Trims
   • 2:19–2:28 Final Installation and Snap into Place