This Deck’s Got Defects #backyard #diy #construction #landscaping
Video by International Association of Certified Home Inspectors (InterNACHI) · 3 moments used in Oak Valley Designs's DIY guides · 0:58 long

Moments in this video
- 0:20–0:28 Check Baluster Security
From How to Fix a Wobbly Outdoor Stair Railing, Step 1: Inspect the Stair Railing
Next, the inspector moves to the balusters (spindles). He demonstrates checking individual balusters by attempting to move them. He identifies one baluster that is loose and moves freely, indicating a potential safety hazard and a need for repair. The video explicitly states that such loose components 'need to be fixed'.
- 0:21–0:29 Check Individual Baluster Security
From How to Fix a Wobbly Outdoor Stair Railing, Step 1: Inspect the Stair Railing
Go along the railing and firmly grasp each baluster. Attempt to shake or wiggle it. Each baluster should be securely fastened to both the top and bottom rails. The video shows an example of a baluster that is loose and moves freely, indicating a significant safety hazard that requires immediate repair.
- 0:29–0:58 Measure Baluster Spacing for Code Compliance
From How to Check Your Stairs Against Building Code, Step 8: Inspect Balusters and Guardrails
Visually inspect and, if necessary, use a measuring tape to check the distance between adjacent balusters. The inspector points out that the spacing in the demonstrated railing is greater than 4 inches, which is a common deficiency in older decks. Modern safety standards require that a 4-inch sphere cannot pass through any opening in the guardrail, including between balusters, to prevent a small child from falling through or getting stuck. This non-compliance indicates a need for immediate corrective action, which could involve adding additional balusters or reinforcements.
Guides that use this video
Transcript
0:02 When I inspect the deck, one of the things I like to do is to make sure that the guard can support a push outwards. Not necessarily inwards, but outwards. Just imagine a bunch of friends pushing. It shouldn't go out. And also the spindles should be fastened secure Oh. securely, unlike this one, right? So, that needs to be fixed. And then the space in between the spindles is more than 4 in apart. That's large enough for a small child to fall through the guard. The guard is supposed to prevent you from falling off. But, we know now that this house was built to code back then, but modern standards
0:49 require the vertical spindles to have smaller spaces in between, so that small kids don't fall out. That's a guard. Prevents you from falling.
Automatically transcribed from the source video.
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

