powered by

सीढ़ियों का नाप निकालने का सबसे आसान तरीका || Riser ka naap Kaise nikale ||

Video by MS tiles and marble fitting · 2 moments used in Oak Valley Designs's DIY guides · 5:16 long

Moments in this video

  1. 0:43–1:29 Measure Total Staircase Height (Method 1) From How to Measure Basement Stairs with Uneven Steps, Step 6: Document All Measurements

    With the laser level providing a horizontal reference on the top landing, the presenter uses a measuring tape to measure the total vertical height from this reference line down to the finished bottom floor level. He notes that the bottom floor already has granite installed, so the measurement is taken directly from its surface. This single measurement gives the total vertical rise of the entire staircase.

  2. 1:29–2:36 Count Risers and Measure Tread Thickness From How to Measure Stairs That Are Different Widths, Step 8: Document All Measurements

    The presenter counts the number of existing risers (steps) from the top landing down to the bottom floor, noting each one. Then, he measures the thickness of one of the granite treads that will be installed on the stairs. He confirms that the staircase has 16 risers and that each granite tread has a thickness of 10.5 inches.

Guides that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

सीढ़ियों का नाप निकालने का सबसे आसान तरीका || Riser ka naap Kaise nikale || — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.