powered by

Installing Cable Railings Like a Pro #deckbuilder #construction #carpentry

Video by drdecks · 2 moments used in Oak Valley Designs's DIY guides · 0:40 long

Moments in this video

  1. 0:10–0:20 Uncoiling and Initial Cable Threading From How to Tension and Adjust Stair Cable Railing, Step 1: Initial Cable Engagement

    The workers begin by uncoiling a large spool of stainless steel cable. Once uncoiled and straightened, the cable is carefully threaded through the pre-drilled holes in the railing posts. This process often starts at one end of a cable run, pulling the cable through several intermediate posts to ensure it runs smoothly and without kinks. It is advisable to wear work gloves to protect hands from potential cuts from the cable strands.

  2. 0:25–0:35 Attaching and Initial Tightening of Tensioning Terminals From How to Tension and Adjust Stair Cable Railing, Step 3: Install Tensioning Device at Opposite End

    At the opposite end of each cable run, a tensioning terminal is attached. These fittings typically include a threaded component that allows for tightening the cable. The worker is clearly shown using wrenches to screw in and tighten these tensioners. The cable is inserted into the tensioning fitting, and then the assembly is tightened to pull the cable taut. This process is repeated for each cable until all cables have their tensioning terminals installed and have some initial tautness.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Installing Cable Railings Like a Pro #deckbuilder #construction #carpentry — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.