powered by

How to Install a Dimmer Switch

Video by Today's Homeowner with Danny Lipford · 2 moments used in Oak Valley Designs's DIY guides · 0:31 long

Moments in this video

  1. 0:03–0:08 Turn Off Power at Breaker Panel From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom, Step 1: De-energize the circuit

    Before beginning any electrical work, it is crucial to ensure that the power to the circuit you will be working on is completely off. Locate your home's main circuit breaker panel, which is typically found in a basement, garage, or utility closet. Consult the panel's legend or diagram to identify the circuit breaker that controls the light switch you intend to replace. Once identified, firmly flip the corresponding circuit breaker to the "OFF" position to de-energize the circuit.

  2. 0:08–0:12 Remove Existing Light Switch From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom, Step 2: Remove existing switch and light fixture

    Once the power is confirmed off, use a flat-head screwdriver to carefully remove the faceplate of the existing light switch. Then, use a Phillips-head or flat-head screwdriver (depending on the screw type) to unscrew the mounting screws that hold the switch body to the electrical box in the wall. Gently pull the existing light switch out of the electrical box, exposing the connected wires. Carefully disconnect the wires from the old switch. This usually involves loosening screw terminals or unwrapping wires from push-in terminals.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How to Install a Dimmer Switch — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.