powered by

How to fix squeaky floors

Video by Mad Buildz · 3 moments used in Oak Valley Designs's DIY guides · 7:27 long

Moments in this video

  1. 0:13–0:54 Inspect the Squeak No More Kit Components From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors, Step 2: Prepare the Squeak Repair Kit

    Begin by familiarizing yourself with the 'Squeak No More' kit. This kit typically includes a carpet adapter (not used for hardwood), a hardwood/softwood adapter, specialty scored screws, a drive bit for your drill, and a joist finder screw. Understanding each component's purpose will be beneficial during the repair process.

  2. 0:55–1:16 Locate and Mark the Squeaky Area From How to Fix a Squeaky Floor on a Stair Landing, Step 1: Locate Squeak Source

    To accurately pinpoint the source of the squeak, place a piece of tape in the general area where you hear the floor squeaking. Then, gradually walk around and apply pressure to the floor, listening for the loudest point of the squeak. Once found, reposition the tape to mark the exact spot where the squeak is most prominent. This marked spot will guide where to investigate for the joist and drive the screws.

  3. 3:57–4:25 Repeat for All Squeaky Areas From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors, Step 6: Test the Repaired Area

    Continue the process of locating joists, drilling pilot holes, testing with the joist finder screw, and then driving scored screws in all areas where you hear squeaks. After driving each screw, test the floor by walking over it to check if the squeak has been eliminated or significantly reduced. Repeat until you are satisfied with the results.

Guides that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How to fix squeaky floors — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.