powered by

How to Build & Install Deck Railings

Video by decks.com · 2 moments used in Oak Valley Designs's DIY guides · 2:13 long

Moments in this video

  1. 0:49–1:01 Install Top and Bottom Rails From How to Install a Deck Stair Railing, Step 3: Install Top and Bottom Rails

    Measure the exact distance between each installed rail post. Cut 2x4 lumber to create your top and bottom rails, ensuring they fit snugly between the posts. When installing the bottom rail, allow for a 3 1/2-inch sweep space between the bottom edge of the rail and the deck surface. Attach each end of the rails to the posts using four 3 1/2-inch trim screws, driven in diagonally for enhanced strength and stability.

  2. 1:01–1:29 Attach Balusters From How to Install a Deck Stair Railing, Step 4: Install Balusters (Spindles)

    Install your balusters, ensuring that the space between them does not exceed 4 inches, as mandated by code for safety. To achieve even spacing, start by marking the center of the rail. Then, use a 2x4 spacer block as a guide, positioning it from the center mark and working outwards towards the posts. This method helps determine if a baluster or a space should fall exactly at the center and allows for adjustments to achieve the most even distribution. Once positioned, simply screw each baluster to both the top and bottom rails using a 2 1/2-inch trim screw.

The guide that use this video

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

How to Build & Install Deck Railings — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.