How I poured my Concrete Basement Floor D.I.Y.

Moments in this video

1. 10:04–11:22 Final Troweling and Finishing From How to Pour a Concrete Landing Pad for Deck Stairs, Step 8: Finish the Concrete

   Allow the concrete to harden to the point where you can press your finger into it about 1/4 inch deep without leaving a deep impression. At this stage, begin the final finishing process using steel hand trowels. To avoid leaving marks or impressions, use knee boards or knee pads to evenly distribute your body weight. Move the steel trowel in a back-and-forth fanning motion. Always keep the leading edge of the trowel slightly tilted up in the direction of movement to prevent it from digging into and marring the surface. Multiple passes will likely be necessary to achieve the desired smooth finish. If any areas are still rough, a quick pass with a hand mag float might be needed before using the steel trowel. If the concrete is setting too quickly due to high temperatures, you can lightly mist the surface with water, but be extremely cautious as too much water can weaken the concrete and lead to cracking.

The guide that use this video

• How to Pour a Concrete Landing Pad for Deck Stairs