powered by

Easiest way to build STAIRS | Off-Grid Cabin

Video by Frugal Off Grid · 1 moment used in Oak Valley Designs's DIY guides · 3:38 long

Moments in this video

  1. 0:04–0:28 Measure Total Rise From How to Measure Basement Stairs with Uneven Steps, Step 5: Measure Overall Staircase Dimensions

    Begin by measuring the total vertical distance from the finished lower surface to the intended finished upper surface where the staircase will end. The video emphasizes measuring from 'finished surface to finished surface.' If the upper flooring is not yet installed (e.g., 2 inches thick), remember to account for its thickness. The example in the video uses a total rise of 85.5 inches.

The guide that use this video

Transcript

0:01 in this video I'm going to show you how to make some super simple stringers for stairs the first step is to measure from a finished surface to a finished surface so if you didn't have that flooring up there yet you would just measure from the finished surface to what the finished surface will be in the future those boards are 2 in thick so you would add 2 in to the joist hangers finish surface to finish surface in this case it's 85.5 in so take the 85.5 in and take a guess is 10 stairs good divide 10 into 85.5 and you want to find a rise that is

0:48 close to seven and it's good to have a run that's close to 11 7 and 11 across the board is a pretty good setup for staircase it's a comfortable rise and run so do the math until you work it out so that it's close to s for a rise 11 for a run I know I'm going to discard this piece so I'm going to cut a straight line 90° then 11 in I marked here 7.7 here I'll cut this and I'll make a jig the knot in the corner there snapped off so I'll have to cut it one more time and these things happen if you want to be absolutely sure you don't waste any wood start halfway on The Jig like this

1:36 right at the tip there and that way you'll make use of every bit of the board that's possible for the bottom of the stairs just rotate The Jig make it square and draw your line here remember to remove the depth of the board in this case 2 in this part will rest on the already finished floor the result will be identical risers on the entire staircase you coming good boy come on he's never even seen stairs good boy come on look look stairs see come on you can do it good boy look

2:23 stepes look stairs stairs good boy good there you go look come on up here steps steps come here buddy good boy there you go come here good good boy yeah you're not going to fall come on stay here good boy he got scared good boy it's okay good that's a yeah that's how you do it don't go that way come on good good see how smart you are it's okay those are safe stairs buddy yeah you can come up here in the

3:14 bedroom no don't go out there good boy yeah he's a good guy yeah look come here good boy good good job see good boy come on good good boy see

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Easiest way to build STAIRS | Off-Grid Cabin — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.