powered by

3 way switches explained #tools #electrical #diy #homeowner #trades

Video by Living Lost: · 1 moment used in Oak Valley Designs's DIY guides · 2:20 long

Moments in this video

  1. 0:25–1:15 Identify Wires and Switch Terminals From How to Wire a 3-way Switch for Stair Lights at the Top and Bottom, Step 3: Identify and label wires

    Before starting the wiring, it's crucial to understand the components. You will need '14-3 wire', which is characterized by having an extra red wire in addition to the black, white, and bare ground wires found in standard '14-2 wire'. This red wire will serve as one of the 'traveler' wires between the two switches. Each 3-way switch has three terminals for wires: a distinct dark-colored screw (often black) for the 'common' wire, and two lighter-colored screws (often brass) for the 'traveler' wires. The common terminal on the switch receiving power from the panel is where the incoming hot wire connects, and the common terminal on the switch connected to the light fixture is where the outgoing hot wire to the light connects. The two brass terminals on each switch are where the traveler wires connect, allowing power to 'travel' between the switches.

The guide that use this video

Transcript

0:01 If your three-way switch only works in one direction like this, I'll show you how to fix it. Let's get after it. A three-way switch doesn't actually turn the power on and off, it just chooses which path the power takes via your traveler wires there. Now, the most common problems, probably 90% of problems people have with three-way switches, is that their traveler and their common are mixed up. So, I'm going to go ahead and I'm going to wire this up the right way. I'll show you guys how to do it. All right, so a few things before we even get started. First of all, you're going to need 14 three-wire. It has that extra red one. As where you see 14 two doesn't have the red. That red's going to act as your traveler, and that's super important. You need three-way switches. Here you have three terminals for your wire, one common, and two travelers, as opposed to just your

0:48 normal switch. So, when it comes to wiring a three-way switch, this is the most important thing, your common. Your common's going to be what your power comes into from your panel, and your common is going to be what your power leaves out of to your light fixture. These two brass ones here are just your travelers. Power travels back and forth between the two of them. This supplies your power. This is where your power leaves. So, go ahead, take your black here and cinch this down. Okay, so we got power in. Now, here's our light. Put your black on your common here. So, there we go. We got power in and power out. Now, all your whites get connected. You don't do anything crazy with your whites, they just all get connected.

1:34 Grounds, just go ahead and twist your grounds up. Okay, so that's it. We have power coming in to our common down here, the black one. We have black traveler going here to our brass, and it ends here, and we have a red traveler, and a red traveler, both going to our brass. Our whites are tied together, white white white white. Whites ending here, and then all our grounds are tied together. So, when we plug this in, this one will turn it off. This one will turn it on. This one will turn it off. This one will turn it off. Got it? So, 90% of your problems with three-way switches are your common and your travelers. Once you get those figured out, you should be good to go. Follow for more.

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

3 way switches explained #tools #electrical #diy #homeowner #trades — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.