Secure Treads to Stairs

What happens in this clip

To install the prepared carpet tread, first ensure your alignment is correct. You can use a laser level to project a straight line from the wall across the stair, or simply use a tape measure to ensure consistent spacing from the wall for each tread. Once aligned, carefully place the tread onto the stair, ensuring the adhesive side makes contact with the hardwood. Apply firm pressure across the entire surface of the tread, using your feet or a specialized roller tool, to ensure the double-sided tape adheres completely and securely to the stair.

Goal: Securely attach each carpet tread to the hardwood stair.

What's used

Tools

• Carpet Treads (with tape applied) Canyon
• Laser Level
• Chalk line
• Roller Tool
• Tape Measure

About the full video

This project provides a step-by-step guide on how to install carpet treads on hardwood stairs using double-sided carpet tape. The process involves preparing the treads, accurately positioning them, and securing them to enhance safety and aesthetics without requiring advanced tools or skills.

Step 5 of 6: Install Carpet Treads

Starting from the back of the stair tread and working forward, carefully align the carpet tread with the edges of the concrete step. Once positioned, apply firm, even pressure across the entire surface of the tread. Starting from the center and working outwards, use your hands or a hand roller to ensure complete adhesion and to eliminate any air pockets. Pay particular attention to pressing down the edges.

Open this step in the guide

Every video in How to Install Carpet Treads on Concrete Basement Stairs

1. Step 1: Clean Concrete Stairs

   • 1:19–2:05 Cleaning the Concrete Surface
   • 1:13–1:50 Apply Cleaner to Stairs
   • 0:00–0:01 Prepare Concrete Stairs

2. Step 2: Measure and Mark Treads

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 7:20–9:07 Measure and Cut Carpet

3. Step 3: Cut Carpet Treads

   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 3:07–3:56 Plan and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:09–0:25 Apply Flooring Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 3:25–4:32 Secure Treads to Stairs (this video)

6. Step 6: Allow Adhesive to Cure

   • 3:06–3:19 Project Completion
   • 3:44–4:26 Final Curing and Caulking
   • 0:31–0:38 Inspect and Finish Installation