Install Carpet Treads

What happens in this clip

Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.

Goal: Securely attach all carpet treads to the stairs.

What's used

Tools

• Carpet Stair Treads (prepared)
• Small Roller
• even pressure to secure treads.

About the full video

This DIY project provides a comprehensive guide to installing carpet treads on existing stairs. The goal is to enhance safety and comfort, particularly for pets like dogs, by providing increased traction and cushioning. The process involves preparing the stairs, selecting appropriate treads, and securely attaching them, resulting in a more pet-friendly and aesthetically pleasing staircase.

Step 5 of 6: Install Carpet Treads

Starting from the back of the stair tread and working forward, carefully align the carpet tread with the edges of the concrete step. Once positioned, apply firm, even pressure across the entire surface of the tread. Starting from the center and working outwards, use your hands or a hand roller to ensure complete adhesion and to eliminate any air pockets. Pay particular attention to pressing down the edges.

Open this step in the guide

Every video in How to Install Carpet Treads on Concrete Basement Stairs

1. Step 1: Clean Concrete Stairs

   • 1:19–2:05 Cleaning the Concrete Surface
   • 1:13–1:50 Apply Cleaner to Stairs
   • 0:00–0:01 Prepare Concrete Stairs

2. Step 2: Measure and Mark Treads

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 7:20–9:07 Measure and Cut Carpet

3. Step 3: Cut Carpet Treads

   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 3:07–3:56 Plan and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:09–0:25 Apply Flooring Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads (this video)
   • 0:59–2:07 Install First Stair Tread
   • 3:25–4:32 Secure Treads to Stairs

6. Step 6: Allow Adhesive to Cure

   • 3:06–3:19 Project Completion
   • 3:44–4:26 Final Curing and Caulking
   • 0:31–0:38 Inspect and Finish Installation