Inspect and Finish Installation

What happens in this clip

Visually inspect the installed vinyl stair tread to ensure it is perfectly aligned, securely adhered, and free of any gaps or lifted edges. Repeat the process for all remaining stair treads to complete the staircase. Allow adequate time for the adhesive to fully cure according to the manufacturer's instructions before putting the stairs into regular use. The finished result showcases a durable and aesthetically pleasing staircase.

Goal: After installation, inspect the newly installed vinyl stair tread for proper placement and adhesion, ensuring a professional and durable finish.

About the full video

This video showcases the installation of custom-made solid vinyl stair treads using an adhesive method. The installer highlights the durability and aesthetic appeal of vinyl as a superior alternative to traditional wood for staircases, demonstrating the application of construction adhesive and hot glue before precisely placing the vinyl tread.

Step 6 of 6: Allow Adhesive to Cure

Avoid walking on the newly installed carpet treads until the adhesive has completely cured. Curing times can vary significantly depending on the type of adhesive used and environmental conditions (temperature, humidity). Refer to the adhesive packaging for specific cure time recommendations, which can range from 24 to 72 hours.

Open this step in the guide

Every video in How to Install Carpet Treads on Concrete Basement Stairs

1. Step 1: Clean Concrete Stairs

   • 1:19–2:05 Cleaning the Concrete Surface
   • 1:13–1:50 Apply Cleaner to Stairs
   • 0:00–0:01 Prepare Concrete Stairs

2. Step 2: Measure and Mark Treads

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 7:20–9:07 Measure and Cut Carpet

3. Step 3: Cut Carpet Treads

   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 3:07–3:56 Plan and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:09–0:25 Apply Flooring Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 3:25–4:32 Secure Treads to Stairs

6. Step 6: Allow Adhesive to Cure

   • 3:06–3:19 Project Completion
   • 3:44–4:26 Final Curing and Caulking
   • 0:31–0:38 Inspect and Finish Installation (this video)