Project Completion

What happens in this clip

Once all installation steps are complete, including securing risers, treads, and optional return trim, and after allowing the adhesive to fully dry (typically 24 to 48 hours), your beautiful new stairs are ready to use. Enjoy your newly updated staircase for years to come!

Goal: Complete the stair tread installation

About the full video

This project provides step-by-step instructions for properly installing performance accessory stair treads and risers. It covers preparation, precise measuring and cutting, adhesive application, securing with a finish nailer, caulking expansion gaps, and installing optional return trim for exposed stair sides. The guide emphasizes the importance of specific adhesive types and proper expansion gaps for a durable and aesthetically pleasing finish.

Step 6 of 6: Allow Adhesive to Cure

Avoid walking on the newly installed carpet treads until the adhesive has completely cured. Curing times can vary significantly depending on the type of adhesive used and environmental conditions (temperature, humidity). Refer to the adhesive packaging for specific cure time recommendations, which can range from 24 to 72 hours.

Open this step in the guide

Every video in How to Install Carpet Treads on Concrete Basement Stairs

1. Step 1: Clean Concrete Stairs

   • 1:19–2:05 Cleaning the Concrete Surface
   • 1:13–1:50 Apply Cleaner to Stairs
   • 0:00–0:01 Prepare Concrete Stairs

2. Step 2: Measure and Mark Treads

   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 7:20–9:07 Measure and Cut Carpet

3. Step 3: Cut Carpet Treads

   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 3:07–3:56 Plan and Cut Carpet Pieces
   • 0:37–0:59 Measure and Cut Carpet

4. Step 4: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:09–0:25 Apply Flooring Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 3:25–4:32 Secure Treads to Stairs

6. Step 6: Allow Adhesive to Cure

   • 3:06–3:19 Project Completion (this video)
   • 3:44–4:26 Final Curing and Caulking
   • 0:31–0:38 Inspect and Finish Installation