Prepare the Self-Adhesive Stair Tread

What happens in this clip

Take one self-adhesive stair tread and turn it over to expose its backing. Carefully peel off the clear plastic protective film from the entire adhesive surface of the tread. This action prepares the tread for immediate application, exposing the sticky side.

Goal: Expose the adhesive backing of the stair tread.

What's used

Tools

• Hands

Materials

• Self-Adhesive Stair Tread
• Carpet tiles
• Non-adhesive stair treads with separate adhesive

Pro tips for this step

• Oak Valley Designs Pro Tip: Ensure the entire plastic liner is removed to expose the full adhesive for a secure bond.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This project demonstrates the quick and easy installation of self-adhesive stair treads onto wooden stairs. The process involves preparing each tread by peeling off its protective film, then carefully positioning and pressing it onto the stair. The result is an instant aesthetic upgrade and improved safety for the staircase.

Step 1 of 2: Step 1: Reveal the Adhesive Backing

This crucial first step is part of our signature 'Clean, Peel, and Stick' installation method. Carefully peel the clear plastic liner completely off the back of each carpet stair tread. This exposes the advanced, pressure-sensitive adhesive that will create a strong, secure bond with your staircase while protecting your beautiful wood underneath. It's designed for simple, lasting adhesion without any damage.

Open this step in the guide

Every video in how to give your staircase a makeover with carpet stair treads

1. Step 1: Step 1: Reveal the Adhesive Backing

   • 0:14–0:17 Peel Backing from Tread
   • 0:08–0:10 Prepare the Self-Adhesive Stair Tread (this video)
   • 0:06–0:13 Apply Self-Adhesive Treads

2. Step 2: Step 2: Place and Secure Your Tread

   • 0:10–0:18 Place and Secure First Tread
   • 0:10–0:13 Secure the First Tread
   • 0:10–0:13 Place the First Stair Tread