Place the First Stair Tread

What happens in this clip

Begin the installation by taking one carpet stair tread and carefully positioning it on the desired step. Ensure the tread is centered, straight, and leaves an even border of exposed wood on the sides and front of the stair. Once properly aligned, firmly press down across the entire surface of the tread, especially focusing on the edges and corners, to activate the non-slip backing and securely bond it to the clean wooden stair. The video shows a foot pressing on the tread and a hand lifting it slightly to confirm its non-slip nature.

Goal: Securely install the initial carpet stair tread.

What's used

Tools

• Carpet Stair Tread Oak Valley Designs
• Measuring Tape
• Yardstick

About the full video

This project provides a step-by-step guide on how to easily install pre-made carpet stair treads onto an existing wooden staircase. The process involves preparing the stair surface, carefully placing each tread, and securing them with their integrated non-slip backing to enhance safety, reduce noise, and protect the original stair finish.

Step 2 of 2: Step 2: Place and Secure Your Tread

Now for the 'stick'! After removing the liner, take your time to precisely align the carpet stair tread on your step or landing area. We recommend starting at the back edge of the tread, gently laying it down. Once you're confident in your placement, apply firm, even pressure across the entire surface of the tread. This activates our specialized adhesive, creating a strong, secure bond that won't damage your beautiful wooden stairs. The Oak Valley Difference means these treads are designed for peace of mind – easily removable and replaceable if needed, without leaving residue or harm to your underlying surface.

Open this step in the guide

Other videos for this step

• Place and Secure First Tread
• Secure the First Tread