Install the New Light Bulb

What happens in this clip

With the old bulb removed, take the new light bulb. Carefully align the base of the new bulb with the socket threads inside the recessed fixture. Gently twist the bulb clockwise until it is snug. Do not overtighten, as this can damage the bulb, the socket, or make future removal difficult. Ensure the bulb is fully seated and making proper electrical contact.

Goal: Securely screw in the replacement light bulb

What's used

Tools

• Extension Ladder Louisville

Materials

• New Light Bulb

About the full video

This project demonstrates the safe and efficient process of replacing a light bulb in a recessed ceiling fixture. It involves correctly positioning and extending an extension ladder, safely ascending to the fixture, removing the old bulb, installing a new one, and then safely descending and stowing the ladder.

Step 4 of 7: Install new light bulbs

Take your new light bulbs and align the base of each bulb with an empty socket. Gently screw each bulb clockwise into its socket until it is snug. Do not overtighten, as this can damage the bulb or the socket.

Open this step in the guide

Every video in How to Remove a Ceiling Light Cover to Change the Bulbs

1. Step 1: Turn off power to the light fixture

   • 0:50–1:05 Turn Off Power at Circuit Breaker
   • 0:47–0:52 Turn Off Power at Circuit Breaker
   • 0:03–0:05 Shut Off Power to the Circuit

2. Step 2: Remove the light fixture cover

   • 1:50–2:38 Remove Old Light Fixture Glass Cover and Bulbs
   • 1:03–1:50 Remove Light Fixture Cover
   • 0:17–0:23 Remove Light Bulb Cover and Bulbs

3. Step 3: Remove old light bulbs

   • 0:34–0:50 Unscrew Old Bulb
   • 1:50–2:05 Remove Light Bulbs
   • 0:38–1:04 Remove the Old Bulb

4. Step 4: Install new light bulbs

   • 1:15–1:30 Install New Light Bulb
   • 1:04–1:12 Install the New Bulb
   • 0:26–0:31 Install the New Light Bulb (this video)

5. Step 5: Reattach the light fixture cover

   • 6:11–6:23 Replace the Fixture Cover
   • 0:57–1:08 Reinstall Dome Light Cover
   • 0:55–1:09 Install the Light Cover

6. Step 6: Restore power to the light fixture

   • 10:35–10:39 Restore Power and Test the New Fixtures
   • 2:59–3:02 Restore Power
   • 2:11–2:21 Restore Power and Test

7. Step 7: Test the light fixture

   • 9:22–9:55 Restore Power and Test
   • 8:04–8:19 Restore Power and Test
   • 2:47–2:52 Test New Light Fixture