Install Remaining Treads

What happens in this clip

With the first tread securely in place, proceed to install the remaining carpet stair treads. Follow the same procedure as the first tread for each subsequent step. Carefully position each tread, ensuring consistent spacing and alignment with the previously installed treads. Press down firmly across the entire surface of each tread to ensure it adheres properly. The video shows the rapid progression of installing multiple treads, highlighting the ease of the process. Pay close attention to maintaining a uniform appearance across all steps. Take your time to ensure each tread is perfectly aligned before pressing it down firmly.

Goal: Install all carpet stair treads on the staircase.

What's used

Tools

• Hands
• J-Roller or Seam Roller
• Heavy book wrapped in cloth

Materials

• Oak Valley Designs Carpet Stair Treads Oak Valley Designs

About the full video

This DIY project demonstrates the straightforward process of installing carpet stair treads on a wooden staircase using pre-manufactured treads. The project aims to enhance safety, reduce noise, and improve the aesthetic appeal of stairs. The process involves unboxing the treads, preparing the staircase, carefully placing and aligning each tread, and securing them to achieve a professional and finished look.

Step 5 of 5: Repeat for Remaining Treads

Move to the next stair tread and repeat steps 2, 3, and 4. Ensure consistent spacing and alignment between each carpet tread and the previous one. Continue this process until all stair treads have a carpet tread installed.

Open this step in the guide

Every video in How to Center and Space Carpet Treads Evenly

1. Step 1: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Mark Center Line

   • 0:40–0:54 Mark Stair Centerline
   • 0:09–0:16 Mark Stair Centers
   • 0:10–0:16 Measure and Mark Stair Tread Placement

3. Step 3: Position First Carpet Tread

   • 0:59–2:07 Install First Stair Tread
   • 0:06–0:10 Install First Stair Tread
   • 0:04–0:06 Install Carpet Treads

4. Step 4: Adhere Carpet Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads

5. Step 5: Repeat for Remaining Treads

   • 0:10–0:15 Install Remaining Stair Treads
   • 0:18–0:24 Install Remaining Treads (this video)
   • 0:13–0:21 Install Remaining Treads