Mark Stair Centers
From How to Center and Space Carpet Treads Evenly · Step 2 of 5 · Video by Emily Bylund
Showing 0:09–0:16 of the source video. Watch the full video with every moment.
What happens in this clip
Using a measuring tape, find the exact center of each stair step. Mark this center point with a small piece of painter's tape. This central guideline will help in accurately positioning the carpet runner later. You can also mark the desired outer edges of where the runner will sit if you prefer additional alignment guides.
Goal: Find and mark the center of each stair step with a piece of painter's tape to ensure the runner is installed symmetrically.
What's used
Tools
- Measuring Tape
- Painter's Tape
About the full video
This project guides you through installing a carpet runner on wooden stairs to reduce noise and add comfort. It covers measuring, marking, applying carpet tape, securely stapling the runner, and joining multiple runner pieces for a seamless look.
What's said in this clip
going to show you how to add a stair runner to your stairs first measure the width of the carpet that you're going to be using and then cut pieces of tape to match that width I used a piece of painting tape as my guide I then measured the center of each step and marked the spot with a piece of tape you can also Mark the outside edges of where you want your carpet to be on each step I then centered each piece of carpet tape onto each step I used an electric staple gun to then attach the carpet to the stairs it is important to make sure that the carpet is very tight during
Automatically transcribed from the source video.
Step 2 of 5: Measure and Mark Center Line
Using a tape measure, find the center point of the depth of each stair tread. Mark this point lightly with a pencil. Then, using a chalk line or a long straight edge and a pencil, draw a line from this center point to the front edge of the tread, parallel to the sides. This line will serve as your guide for centering the carpet treads.
Every video in How to Center and Space Carpet Treads Evenly
Step 1: Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Center Line
- 0:40–0:54 Mark Stair Centerline
- 0:09–0:16 Mark Stair Centers (this video)
- 0:10–0:16 Measure and Mark Stair Tread Placement
Step 3: Position First Carpet Tread
- 0:59–2:07 Install First Stair Tread
- 0:06–0:10 Install First Stair Tread
- 0:04–0:06 Install Carpet Treads
Step 4: Adhere Carpet Tread
- 3:25–4:32 Secure Treads to Stairs
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Repeat for Remaining Treads
- 0:10–0:15 Install Remaining Stair Treads
- 0:18–0:24 Install Remaining Treads
- 0:13–0:21 Install Remaining Treads
How to Center and Space Carpet Treads Evenly
This project outlines the steps for centering and evenly spacing carpet treads on stairs to create a visually appealing and safe result.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.