Install Carpet Treads with Adhesive
From How to Center and Space Carpet Treads Evenly · Step 4 of 5 · Video by Oak Valley Designs
Showing 1:16–2:09 of the source video. Watch the full video with every moment.
What happens in this clip
Take a carpet tread from its box. The easiest and most rewarding part is installation. First, peel off the protective backing from the adhesive strip on the back of the tread. Position the carpet tread by hooking its bullnose (the front edge) underneath the bottom edge of the stair tread. Then, gently pull back on the tread with one hand to ensure it's nice and tight against the bullnose. Once taut, press firmly across the entire surface of the tread, ensuring it adheres securely. Use the painter's tape as a guide to maintain perfect alignment, ensuring everything is straight.
Goal: Peel off the protective backing from the carpet tread, hook it under the bullnose of the stair, and then firmly press and align it using the painter's tape guide.
What's used
Tools
- Carpet treads
About the full video
This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.
What's said in this clip
Okay, the easiest part and the most rewarding part after all your measuring and hard work. These are your treads. They come in a box. Okay, all you do is peel off the back. Throw that in the floor. I've already put a few on, so I'm going to do the top step. Now, you see our painters tape is still here to guide us on the edge. So, everything is in alignment. You come to the next step and the first thing you do is hook the bullnose underneath the bottom edge and then pull back with this hand to make sure that it's nice and tight. So, as you press on the front and you pull on the back, put a little pressure across the tread, make sure it's lined up with the painters tape, and that's it. It's that easy.
Automatically transcribed from the source video.
Step 4 of 5: Adhere Carpet Tread
Once the carpet tread is properly positioned, carefully peel back the protective backing from the adhesive side. Begin at the front of the tread and slowly smooth the carpet tread down onto the stair tread, working towards the back. Press down firmly, especially along the edges, to ensure a secure bond. You can use your hands or a roller tool to apply even pressure.
Every video in How to Center and Space Carpet Treads Evenly
Step 1: Clean Stair Treads
- 0:34–0:40 Clean the Stairs
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Center Line
- 0:40–0:54 Mark Stair Centerline
- 0:09–0:16 Mark Stair Centers
- 0:10–0:16 Measure and Mark Stair Tread Placement
Step 3: Position First Carpet Tread
- 0:59–2:07 Install First Stair Tread
- 0:06–0:10 Install First Stair Tread
- 0:04–0:06 Install Carpet Treads
Step 4: Adhere Carpet Tread
- 3:25–4:32 Secure Treads to Stairs
- 1:16–2:09 Install Carpet Treads with Adhesive (this video)
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Repeat for Remaining Treads
- 0:10–0:15 Install Remaining Stair Treads
- 0:18–0:24 Install Remaining Treads
- 0:13–0:21 Install Remaining Treads
How to Center and Space Carpet Treads Evenly
This project outlines the steps for centering and evenly spacing carpet treads on stairs to create a visually appealing and safe result.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.