Install Hanging Hardware (Nails/Anchors)

What happens in this clip

Using the precise marks on your leveled painter's tape as a guide, carefully hammer a nail into the wall at each designated point. For most lightweight picture frames, driving a simple nail directly into the drywall at the marked spot will provide sufficient support. If you are hanging a heavier picture frame, use these marked points to guide the drilling of pilot holes for installing appropriate drywall anchors, or to ensure you are drilling into a wall stud for maximum security and load-bearing capacity. Once the nails or anchors are securely in place, gently peel off and remove the painter's tape from the wall.

Goal: Securely install the appropriate hanging hardware at the marked locations

What's used

Tools

• Drill
• Drywall Anchors
• Hammer
• Nails

About the full video

This video demonstrates two effective methods for hanging picture frames equipped with sawtooth hangers: first, a precise method using painter's tape and nails to ensure perfect leveling, and second, an alternative method using adhesive strips to hang lightweight frames without making holes in the wall. The video emphasizes precise measurement and visualization for optimal placement.

Step 6 of 8: Install Hanging Hardware

Carefully install the picture hooks, screws, or anchors at the marked locations. Ensure they are securely fastened into the wall studs or using appropriate anchors for stability.

Open this step in the guide

Other videos for this step

• Prepare Wall for Mounting
• Install Wall Anchors