Install Baby Gate and Verify Compatibility

What happens in this clip

With the mounting board securely in place, you can now install your baby safety gate according to its manufacturer's instructions. The video demonstrates the completed installation of a baby gate onto the system. The kit is compatible with most standard banister post styles, including square-top and bottom, round-top and square-bottom, and round-top and bottom posts. There are also kits available for thinner stairway spindles. Ensure your gate's mounting hardware is less than 1.5 inches wide for compatibility with this specific kit. Brands like Cardinal and KidCo are specifically mentioned as compatible.

Goal: Mount the baby gate to the newly installed wooden board and ensure overall compatibility.

What's used

Tools

• Baby safety gate Cardinal
• KidCo
• Mounting board (from kit) KidSmartLiving.com
• Stairway banisters
• Stairway spindles

About the full video

This project demonstrates an easy, no-drill method for installing baby safety gates onto stairway banisters. It utilizes a specialized installation kit composed of clamps and a wooden board to create a secure mounting surface without damaging the existing woodwork. The kit is versatile, fitting various banister styles and compatible with several baby gate brands.

Step 1 of 4: Install Banister Clamp Mounts

Position the clamp mounts around the banister posts at the desired height for the gate. Ensure the rubber padding is in place to protect the banister finish. Tighten the clamps securely using the provided hardware, ensuring they are level and firmly attached without overtightening. These mounts will serve as the anchor points for the gate hardware.

Open this step in the guide

Every video in How to Install a Baby Gate at the Top of Stairs Without Drilling into the Banister

1. Step 1: Install Banister Clamp Mounts

   • 0:27–0:33 Attach Clamps to the Banister Post
   • 0:14–0:26 Understand the No-Holes Banister Installation Kit
   • 0:43–1:10 Install Baby Gate and Verify Compatibility (this video)

2. Step 2: Attach Gate Mounting Plate to Wall Stud

   • 0:31–0:56 Position Gate and Install Upper Wall Mounts (First Side)
   • 0:24–0:31 Install Lower Wall Mounts (First Side)
   • 3:14–3:37 Mount the Bracket to the Wall

3. Step 3: Assemble and Install Gate Hardware

   • 2:15–2:40 Install Spindles and Final Gate Mounting
   • 5:29–6:07 Install Gate to Staircase
   • 1:11–1:37 Install Spindle Rods and Position Gate

4. Step 4: Test Gate Stability and Latch Function

   • 0:03–0:05 Test Gate Latch and Swing
   • 17:06–18:29 Test Gate Functionality and Latch
   • 1:51–1:59 Test Gate Operation