Attach Clamps to the Banister Post

What happens in this clip

Take the two wooden clamps from the kit. Position one clamp at the top and the other at the bottom of the desired banister post. Use a wrench to securely tighten the bolts on the clamps, ensuring they are firmly attached to the banister without causing damage. The video demonstrates this process by tightening the bolts until the clamps are snug.

Goal: Securely fasten the wooden clamps to the top and bottom of the banister post.

What's used

Tools

• Banister post
• Wooden Clamps KidSmartLiving.com
• Wrench

About the full video

This project demonstrates an easy, no-drill method for installing baby safety gates onto stairway banisters. It utilizes a specialized installation kit composed of clamps and a wooden board to create a secure mounting surface without damaging the existing woodwork. The kit is versatile, fitting various banister styles and compatible with several baby gate brands.

Step 1 of 4: Install Banister Clamp Mounts

Position the clamp mounts around the banister posts at the desired height for the gate. Ensure the rubber padding is in place to protect the banister finish. Tighten the clamps securely using the provided hardware, ensuring they are level and firmly attached without overtightening. These mounts will serve as the anchor points for the gate hardware.

Open this step in the guide

Every video in How to Install a Baby Gate at the Top of Stairs Without Drilling into the Banister

1. Step 1: Install Banister Clamp Mounts

   • 0:27–0:33 Attach Clamps to the Banister Post (this video)
   • 0:14–0:26 Understand the No-Holes Banister Installation Kit
   • 0:43–1:10 Install Baby Gate and Verify Compatibility

2. Step 2: Attach Gate Mounting Plate to Wall Stud

   • 0:31–0:56 Position Gate and Install Upper Wall Mounts (First Side)
   • 0:24–0:31 Install Lower Wall Mounts (First Side)
   • 3:14–3:37 Mount the Bracket to the Wall

3. Step 3: Assemble and Install Gate Hardware

   • 2:15–2:40 Install Spindles and Final Gate Mounting
   • 5:29–6:07 Install Gate to Staircase
   • 1:11–1:37 Install Spindle Rods and Position Gate

4. Step 4: Test Gate Stability and Latch Function

   • 0:03–0:05 Test Gate Latch and Swing
   • 17:06–18:29 Test Gate Functionality and Latch
   • 1:51–1:59 Test Gate Operation