powered by

Cut and Install LED Strips

From How to Make Stairs Safer for Seniors · Step 1 of 4 · Video by Girish Attinamane

Showing 4:23–4:48 of the source video. Watch the full video with every moment.

What happens in this clip

After successfully running all 15 cables through the skirt board, the next step is to install the LED strips themselves. The LED strips come with a 3M adhesive backing for easy installation. First, measure and cut each 40-inch LED strip to fit the length of your specific stair treads (the video states the stairs are 37 inches long). Make sure to cut the LED strips at designated points indicated in the kit's instructions to maintain proper functionality. Once cut, simply peel off the adhesive backing and firmly attach the LED strip to the underside of each stair tread, ensuring it is straight and secure.

Goal: Attach LED strips to each stair tread.

What's used

Tools

  • Scissors

Materials

  • LED Strip Lights (with 3M adhesive) KOMIGAN

About the full video

This project guides you through installing motion-activated LED lighting on hardwood stairs. It covers planning, drilling holes in the skirt board, running cables, installing LED strips, connecting to a controller, and finishing with corner trim. The system uses a KOMIGAN intelligent motion sensor LED stair lighting kit, providing both aesthetic enhancement and practical illumination for stairs.

Step 1 of 4: Install Stair Lighting

Measure and cut LED strip lights to fit the length of each stair tread or the desired illuminated area. Clean the surface where the lights will be adhered using an appropriate cleaner to ensure good adhesion. Peel the backing from the LED strip and carefully press it into place. Connect the lights to a low-voltage power source, such as a transformer or battery pack, ensuring all wiring is concealed and secured. For puck lights, mark the mounting positions, drill pilot holes if necessary, and attach the lights using screws or adhesive. Connect puck lights to their power source and secure wiring.

Open this step in the guide

Every video in How to Make Stairs Safer for Seniors

  1. Step 1: Install Stair Lighting

  2. Step 2: Extend Handrails

  3. Step 3: Apply Non-Slip Treads

  4. Step 4: Add Visual Contrast to Stair Edges

How to Make Stairs Safer for Seniors

This project outlines common modifications to improve stair safety for seniors, focusing on enhancements like improved lighting, handrail extensions, non-slip treads, and visual contrast.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Cut and Install LED Strips — How to Make Stairs Safer for Seniors | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.