powered by
Clip 1/3
Helpful?

Step 1 · Install Stair Lighting

Measure and cut LED strip lights to fit the length of each stair tread or the desired illuminated area. Clean the surface where the lights will be adhered using an appropriate cleaner to ensure good adhesion. Peel the backing from the LED strip and carefully press it into place. Connect the lights to a low-voltage power source, such as a transformer or battery pack, ensuring all wiring is concealed and secured. For puck lights, mark the mounting positions, drill pilot holes if necessary, and attach the lights using screws or adhesive. Connect puck lights to their power source and secure wiring.

Tools and Materials

Measuring Tape Crescent Pro Cutting Scissors, Utility Scissors and Folding Utility Knife Tool Set (3-Piece) Screwdriver Drill Microfiber Cloths Wire Cutter or Stripper Armacost Lighting RibbonFlex Pro 32.8 ft. 12-Volt White Tape Strip Light 60 LEDs/m Soft White (2700K) 132250 3-Light Plug-In LED White Puck Light Kit Dremel B815-01 12V Max 2AH Lithium-ion Battery Pack Wire Connectors 3M Temflex 3/4 in. x 60 ft. 1700 Electrical Tape Black
Install Stair Lighting · How to Make Stairs Safer for Seniors · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.