← Guide
stair tread installation
Step 4 of 6
Step 4 · Step 4: Fit Risers and Skirting Boards
Now let's frame your beautiful new treads. Measure the height and width for each riser and cut your riser boards for a snug fit between the treads. Secure them with wood glue and finish nails. Next, measure and cut the skirting boards that run along the sides of the staircase, ensuring your angles are precise for a clean fit. Attach the skirting boards to the wall studs and stair stringer using wood glue and nails. A tight, flush fit here prevents dust accumulation and elevates the entire look of your staircase.
Use a coping saw or miter saw for precise cuts on skirting boards to achieve clean joints, especially at corners.
Use a coping saw or miter saw for precise cuts on skirting boards to achieve clean joints, especially at corners.
General Hazard
Ensure all fasteners are set below the surface so they can be concealed with filler or paint later.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.