← Guide
stair tread installation
Step 2 of 6
Step 2 · Step 2: Measure Twice, Cut Once
To achieve that seamless, built-in look, every cut needs to be precise. For each step, measure the depth from the back of the tread to the front of the riser. Remember to add your desired nosing overhang, typically between 1 and 1.5 inches, which helps with foot placement and safety. Next, measure the width from one skirting board to the other. Since older homes can have slight variations, measure at both the front and back of the tread and use the larger measurement. Use these exact dimensions to mark your new tread material, ensuring your cuts are perfectly square for a snug, professional fit.
Tools and Materials
Fine Weave Herringbone II - Tread
Account for any irregularities in the existing structure. Measure each stair individually, as they may not be identical.
Account for any irregularities in the existing structure. Measure each stair individually, as they may not be identical.
General Hazard
Accurate measurements are crucial for a good fit. Double-check all measurements before cutting.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.