powered by
Clip 1/3
Helpful?

Step 4 · Mark the Stair Stringer with a Framing Square

Take your stair stringer board (typically a 2x10 or 2x12). Place your framing square on the edge of the board. Align the 'rise' measurement on the tongue of the square with the edge of the board, and align the 'run' measurement on the blade of the square with the edge of the board. Mark this line. This marks your first riser cut. Then, slide the square along the board, keeping the 'rise' measurement at the top edge and the 'run' measurement at the bottom edge, and mark the next riser. Continue this process, stepping the square down the board for each subsequent riser and tread, ensuring your measurements are precise and consistent. The bottom edge of the stringer will have the tread markings, and the top edge will align with the floor joists.

Tools and Materials

FrontLine 36 in. x 36 in. Octagon Black 4-9/16 in. Jamb Geometric Aluminum Clad Wood Window The Home Depot Carpenter Pencils (10-Pack) with Sharpener 216 Measuring Tape 4-Step Ground Contact Pressure-Treated Pine Stair Stringer 279713
Mark the Stair Stringer with a Framing Square · How to Lay Out a Stair Stringer with a Framing Square · Oak Valley Designs DIY Hub

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.