Wall Fix Safety Gate Installation Guide - How to fit your Child/Baby Stair Gate

Moments in this video

1. 2:15–2:40 Install Spindles and Final Gate Mounting From How to Install a Baby Gate at the Top of Stairs Without Drilling into the Banister, Step 3: Assemble and Install Gate Hardware

   Now, add the spindles to each corner of the gate. Your instruction manual will specify which spindles are for the hinge side and which are for the latch side. Once the spindles are in place, hang the gate onto the installed wall fixings on the hinge side. Adjust the spindles by turning them until the gate lines up properly with the latch on the other side. Finally, insert the easy-release safety cap over the top hinge to fully secure the gate in position.

2. 2:15–2:40 Install Spindles and Final Gate Mounting From How to Install a Baby Gate on Stairs with a Banister on One Side and a Wall on the Other, Step 4: Mount the Gate

   Now, add the spindles to each corner of the gate. Your instruction manual will specify which spindles are for the hinge side and which are for the latch side. Once the spindles are in place, hang the gate onto the installed wall fixings on the hinge side. Adjust the spindles by turning them until the gate lines up properly with the latch on the other side. Finally, insert the easy-release safety cap over the top hinge to fully secure the gate in position.

Guides that use this video

• How to Install a Baby Gate at the Top of Stairs Without Drilling into the Banister
• How to Install a Baby Gate on Stairs with a Banister on One Side and a Wall on the Other