powered by

Use THIS Baseboard IDEA on Your Next Project!

Video by Stud Pack · 2 moments used in Oak Valley Designs's DIY guides · 17:48 long

Moments in this video

  1. 3:51–7:38 Select and Purchase Polystyrene Baseboard From How to Install Baseboard Along a Staircase Wall, Step 2: Acquire Baseboard Material

    At the home center, evaluate different baseboard options. Traditional primed MDF and finger-jointed pine are typically sold in 12-foot or 16-foot lengths. While affordable, they are generally unsuitable for bathrooms due to moisture absorption and subsequent damage. Polymer-coated MDF is a step up, offering some moisture resistance, but if cut or nailed, it requires touch-ups, defeating the 'no painting required' claim. For bathrooms, look for truly waterproof materials like polystyrene. Select a polystyrene baseboard that is tall enough to cover any previous baseboard lines or imperfections (e.g., caulk lines) and has a design that matches the desired aesthetic (modern, minimalist, traditional). For this project, a 7/16-inch thick, 4-inch tall polystyrene baseboard with a rounded edge was chosen, with the intention to modify the edge for a squarer profile.

  2. 8:34–9:59 Install Baseboard From How to Install Baseboard Along a Staircase Wall, Step 7: Install the Baseboard Molding

    Apply a bead of construction adhesive (e.g., Liquid Nails) to the back of each pre-cut baseboard piece. Carefully place the baseboard against the wall, aligning its square edge with the floor. Use a nail gun to secure the baseboard to the wall, driving nails into studs every 16 inches. The nails act as clamps, holding the baseboard in place while the adhesive dries. This method helps overcome imperfections in old walls, ensuring the baseboard appears straight and level, even if the original drywall has 'waves.' For corners and specific termination points (like cabinet face frames or door casings), cut the baseboard to fit precisely.

The guide that use this video

Transcript

0:01 hey gang it's paul with stuttback welcome back to our channel jordan and i are back here at our main remodel project i'm in the hall bath and we've got to get this thing done now we get a lot of questions about the materials we use how do we choose them how do we measure for them and where do we buy them so we thought this would be a great opportunity to talk about baseboard in a bathroom and all the options you have including one you may have never thought of but that we think looks absolutely killer now most diyers when they run baseboard in a bathroom they're going to run to their home center and get either primed mdf or primed finger jointed pine now they're gonna look great for a year or two but as soon as they get wet the mdf's gonna swell up we've all seen that and the paint on both of them is gonna start to bubble chip and it's gonna mildew now we have another option that we like to use that avoids all those issues and if you're willing to spend a

0:47 little bit more money we have two other options we want you to consider and we think they look absolutely killer the first of those options is to simply use tile as your baseboard right you can simply buy more of your floor tile rip it on your wet saw or cut it with your snap cutter and put it on the wall just like that or you could buy a complimentary tile that highlights your floor tile and that looks great too there's several things we like about this right it's absolutely waterproof if this gets wet it's just like your floor getting wet just gotta wipe it up it's never gonna warp the paint's never gonna blister and it's never gonna mildew but it does come along with a few cons it is a little bit of a commercial look and not everybody's going to love that the other thing about this is you are going to have some grout joints depending on your layout put it back here behind the vanity but you're going

1:34 to have one here at the corner and on this long wall you're going to have a grout joint every two feet if you're using 12 by 24. the other thing about it is this unfinished edge on top you could put some metal trim on there but that's going to get a little pricey right most people would just put that on there caulk this bring their paint color down and call it good and that looks fine but this last option we're going to talk about right now is a home run and we are talking stone baby now this is a sample from our stone yard but they sell four inch high backsplash material nine feet long for 55 dollars so i could easily do a small bathroom like this with two pieces and look how great that looks it finishes off the floor and the tile beautifully and in fact over here we have the backsplash from our marble

2:19 vanity against the wall so you can see what it looks like in one longer piece and since it's already polished on these two faces all you have to do is cut it to length with your wet saw or a grinder and a little bit of silicone and put it on the wall it couldn't be any easier and check it out against the floor see how flat our floor is since we use the leveling system and this doesn't have any of the disadvantages that a tile base would right the top edge is finished there are no grout joints and when's the last time you saw something like that in a commercial building now before we head to the home center let's quickly measure this bathroom and see how much baseboard we need i'm gonna start over here by the door now it's 22 and three quarter but i'm not going to use that number i'm just going to round up i need two feet on this back wall it's five and a half

3:06 feet i need six feet so two and six i'm at eight and i know this is going to be two so i need ten feet right here where the vanity goes and the extra that i measured for it will easily cover this so we're at eight feet come over here by the window six and it's 14 feet i already know that's three 17 feet another three 20 and we got this little bit a couple of feet here 22 feet will do plenty so if it comes in eight footers i need three eight footers to do this bathroom we've actually already measured the master bathroom we know our total amount let's head to the home center and see if we can find what we need it's really hit or miss these days as far as material right we all run into that let's hop in the truck and see if we can find the material we want all

3:52 right guys here we are in the molding aisle of our local home depot and we're going to break it down into what's on that side and what's on that side so let's start over here as you can see these are 16 footers gang right and 12 footers and what we have here one of the selections is finger jointed pine they take short pieces of pine finger join them like that glue them together send it through the shaper and prime it and it's ready to be installed and painted at your project come on down here a little bit everybody's favorite mdf medium density fiberboard got all kind of profiles and it's also primed on one side a little further down we have a small selection of stain grade material it is one solid piece of material ready for stain there's no joints in it but if you

4:37 wanted to buy this and prime it and paint it that would be a good option too but in our bathroom we don't want anything with wood in it we've all seen a bathroom that has mdf base and it gets wet and it swells up and looks terrible so we're gonna head to this side of the aisle where they have some polystyrene products and check those out let's start at the beginning on the other side of the aisle and see what they have it's a polymer coated mdf it's a pretty thick coating and they completely coat all four sides we've used it before and it's pretty good but check this out it says no painting required right but the next line says easy installation cut nail and touch up well what are you going to touch it up with the liquid nails they have right here now guys like me i'm going to nail it up fill those holes and paint the whole thing but i guess you

5:24 could glue it up right but this isn't what we're looking for let's head down a little bit more and see if we can find something that's going to work in our bathrooms this next little section right here the no miter installation section right if you don't have a miter box you don't want to deal with all the angles this is where you head to right you've got your outside your inside corners for crown you've got plenty blocks rosettes for your casing and this is what it looks like when you're done not the look we're after it looks fine but let's head on down and see if we can find something we can use in our bathrooms the next little section here polystyrene basically a plastic right that's what we're looking for in our bathrooms why it's completely waterproof if that tub overflows the toilet overflows it's not going to ruin our baseboard but all this is matched to look like wood it's not what we're looking for in our project let's head to the next bay all right

6:10 here's what we're looking for the white polystyrene it's going to work great in our bathroom if it ever gets wet you'll never be able to tell and we need base right so we only have like five choices here one two three four five so there's really three things we're after here we need something tall enough that's going to cover where the existing base used to be we had that old line of caulk on the wall even though we scraped it off you can still tell where it was so we need something tall enough to cover that the second thing we need is kind of a modern design at that house minimalistic so we want our base to be modern and minimalistic and the third thing we're looking for it has to be proportionate right if we walk in that bathroom has a crazy tall base or a huge crown that's not proportionate with the trim in the rest of the house it's gonna look like it's off right like we didn't know what

6:55 we're doing so we're looking for a thinner more narrow profile so that really only leaves us with these two right here this one's cool it's only 7 16 of an inch thick it's four inches tall but one thing i don't like about it this edge is rounded and this edge is rounded so if i put that on the floor we're going to have a rounded edge of our base on our nice flat tile and i'd rather have a square edge right there so let's hop over to this one it's a little bit thicker than this one which i like but it has this colonial edge so i think what we're going to do we're just going to send this through our table saw rip off that edge have a nice square edge we can put on our floor and a bonus this is a little cheaper than the other one so let's grab what we need get out of here all right we're back here at the job site and we don't even need to go back

7:41 inside because we already know that we're going to cut this profile off the baseboard and so instead of this being the top this is going to be the top so let's head over to the table saw and get it set up to rip this baseboard [Music] one thing you got to know when cutting polystyrene you got to cut fast i'm going to show you what happens when you cut slow check it out it melts it and that's kind of a pain to get off now let's make a fast cut there you go

8:27 now that we have our baseboard ripped to the right height let's head over here to the chop saw cut it to length start running some base [Music] so

9:16 all right guys the base is done and it looks just okay and why does it look just okay because we have some pretty big gaps here between the base and the wall why is that this is a remodel this is the original bathroom wall the original drywall and it's going to have some waves in it especially on a plumbing wall right but we want our base to be straight if i get my nail gun and i nail this thin base to that wall every 16 inches into a stud now we're going to have a wavy base but check it out right here see this nice straight grout line and our baseboard is parallel to it nice and straight that's why we're doing this right so all we're going to do is caulk this and we're going to trick the eye into thinking the wall is straight by making the baseboard straight let's grab our caulk gun make this thing look sharp

10:39 all righty cool man it's the next day and all our caulking is dry and what we have done we have made the illusion that the wall is straight by making the baseboard straight right we use the nails as a clamp while the glue dried and if your eye references the baseboard against this grout line which is perfectly straight they are parallel so we did our job our next step is to paint this but before we paint we have a few things we want to do we want to fill all these little nail holes and since this is pretty smooth plastic i want to give it a light sanding and give it a coat of primer before we put our finished color on and to fill these nail holes i usually use simple spackle right but i have a different product i want to try out i've actually used it before and i forgot about it it's outside on the table let's go check it out what's that product i'm talking about it's durham's water putty comes in a can like this looks like it's from out of

11:25 the 70s right and it's not a putty it's actually a powder and i love that because if you need this much that's all you need to mix up but if you want to mix up the coal can go for it and it doesn't shrink when it dries that's key for me because we all know how that looks right you put some over that nail head and it shrinks and you got a little divot and you put a second coat with this hopefully just one coat let's mix some up get it done [Music] [Applause] [Music]

12:22 all right again this stuff dries very quick let's sand it down i just saved some of these from a pad sander and i use them for stuff like this they work great check it out right here where we had these three nails look how easy that sands perfectly smooth let's scuff up this whole thing and we're ready for paint wanna vacuum real quick all right we got it all sanded and vacuumed and now i'm just going to put one strip of blue tape right here on the tile to protect the floor from our primer and our paint and i gotta say

13:07 this unpainted base with all the nail holes filled and caulked in looks better than the painted base at my house i can't wait to see what it looks like with a coat of paint on it it's gonna look fantastic [Music] all right all the blue tape is down we're ready to start priming i'm using zenzer bullseye one two three primer sticks to all surfaces without sanding we sanded it so it should stick even better here's how i do it i usually use

13:52 a little cut-in bucket so since there's not much left in this gallon bucket i'm going to work right out of there check out my brush suspension system just a little nail driven in the ferrule a little angle and i can hook it right there nice huh let's get to it bud [Music] it's like it's like painting glass it's so smooth the plastic is i don't feel any like pull or drag from the wood like on your painting wood [Music] the final coat of color to the master bat tomorrow i guess i could pick up a gallon of this

14:37 color and give it all right our primer is on and it looks absolutely phenomenal now we did get a late start today jordan i had a big conference call we were on so we're not going to put the finish color on but we're gonna show you that in the next video but before we end this video there's two really important things i want to go over number one is baseboard termination points what do i mean by that well i wasn't too thrilled about putting that thin baseboard in this

15:24 house but it worked for us so check it out the baseboard ends at this face frame on the cabinet and yes we could have gone with a thicker base here but behind jordan over here on our door casing we've got a pretty thin door casing and you never want the baseboard to be thicker than the door casing so it worked out great there yeah don't pay attention to that one we got to take the door casing down and redo it because mom changed it mom changed the design on me right but you can see right yeah yeah yeah and then over here we got this bull nose tile you can even see we profiled it to match and we're going to grout all that to match this old grout it's going to look great and then in the master bath we actually had a piece of the schluter jolly trim that it tied into and it all looks great the other thing we want to talk about is that stone we put down as

16:11 baseboard so it's pretty rare when you spend more money on a product that looks really nice and it's faster to put in usually they look really nice and they're complicated to put in right but stone base really easy and that five dollar per linear foot extra cost well now you're not paying for filler primer sandpaper and all the paint not to mention the time it takes to apply all those products so you gotta look at that when you're spending more for a product that's quicker and easier to install so that's gonna be a wrap on this video and you guys totally earned it go ahead and splurge on the stone wrap your like button in it smash it for jordan i we really appreciate that please ask us a question drop us one of your awesome comments subscribe if you haven't already and we will see you on our next video [Music]

17:09 so let's head over to the table saw and get it set up and rip this oh shoot one thing you gotta know about cutting one thing you need to know about culling one thing you need to know very important about cutting polystyrene you got to go slow i'm going to cut fast and show you what happens it's the opposite oh that's right [Laughter] one thing you got to know about cutting polystyrene is it polyethylene didn't matter ethanol styrene 100 we were just at home depot saying polystyrene forever oh this yeah you're right polyethylene is coke bottle right

Automatically transcribed from the source video.

More from the Oak Valley Designs DIY Hub

Read the guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Use THIS Baseboard IDEA on Your Next Project! — step-by-step moments | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.