UK Carpentry 2nd fixing ***fitting oak staircase half newels and handrails***Part 2
Video by The Tall Carpenter · 1 moment used in Oak Valley Designs's DIY guides · 26:11 long

Moments in this video
- 9:39–13:17 Preparing and Cutting Mitered Handrail Sections
From How to Install a Handrail on a Spiral Staircase, Step 3: Prepare Handrail Ends for Connection
For the next section of handrail, the presenter marks the precise points for a mitered joint. He takes a pre-cut mitered piece of handrail provided by the manufacturer and carefully separates it with a hammer, as it's not the exact size needed. He uses a hand saw to cut the required tenons from the larger handrail piece. He then employs a router to create a slot for a biscuit joint, which will provide additional strength and alignment to the mitered connection. He inserts a biscuit into the slot of one piece. He also prepares a dowel hole on the other end of the handrail. He emphasizes the importance of making the cuts slightly longer than necessary to allow for adjustment and a perfect fit.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

