Stop Squeaky Floors on Carpet or Hardwood
Video by LRN2DIY · 2 moments used in Oak Valley Designs's DIY guides · 6:46 long

Moments in this video
- 1:00–1:37 Gather Squeak Repair Kit and Drill
From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors, Step 2: Prepare the Squeak Repair Kit
Acquire a 'Squeeeek No More' kit, which includes specialized screws, a tripod jig for carpeted floors, and a drill bit with a depth collar. You will also need a power drill or impact driver. The kit's screws are designed with a weak point above the threads, allowing their heads to snap off cleanly after installation.
- 4:49–5:22 Snap Off Screw Heads
From How to Use a Squeak-Repair Kit on Carpeted Stairs and Floors, Step 5: Break Off Screw Heads (if applicable)
With the squeaks addressed, use the kit's screw-head snapping tool to remove the visible screw heads. Place the tool over the screw head, aligning the slot with the screw, and knock it to one side. The screw head will cleanly snap off at its weak point, leaving the remaining threaded portion securely holding the subfloor and joist together. The snapped-off portion can be discarded, and the carpet will cover the flush break point, making it unnoticeable.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

